Rigol DM3058 - Capacitance Characteristics

RIGOL
Programming Guide for DM3058
5-8
The query returns the average of all the statistical data.
9. CALCulate:AVERage:CLEar
Command Format:
CALCulate:AVERage:CLEar
Function:
The command recovers all the settings of calculation function in current
measurement to the defaults.
Explanations:
Firstly, do enable calculation function (CALCulate:STATe□ON) and select limit
function (CALCulate:FUNCtion□AVERage) to run the command.
The data include minimum, maximum, average, number of data and standard
deviation.
10. CALCulate:AVERage:COUNt?
Command Format:
CALCulate:AVERage:COUNt?
Function:
The command queries the number of statistical data.
Explanations:
Firstly, do enable calculation function (CALCulate:STATe□ON) and select limit
function (CALCulate:FUNCtion□AVERage) to run the command.
The number of statistical data can be queried at any time.
Return Format:
The query returns the number of statistical data.
11. CALCulate:AVERage:MAXimum?
Command Format: