The command queries max transient current in DCI measurement.
Explanations:
Before sending the command, please enable DC current measuring function, and
enble DCI peak-to-peak measuring function with the command ―[SENSe:]
CURRent[:DC]:PEAK:STATe□ON‖.
Return Format:
The query returns max transient current in DCI measurement.
4. FETCh:CURRent[:DC]:PEAK:MINimum?
Command Format:
FETCh:CURRent[:DC]:PEAK:MINimum?
Function:
The command queries min transient current in DCI measurement.
Explanations:
Before sending the command, please enable DCcurrent measuring function, and
enble DCI peak-to-peak measuring function with the command ―[SENSe:]
CURRent[:DC]:PEAK:STATe□ON‖.
Return Format:
The query returns min transient current in DCI measurement.
5. FETCh:CURRent[:DC]:PTPeak?
Command Format:
FETCh:CURRent[:DC]:PTPeak?
Function:
The command queries the difference between the highest and lowest DC
transient current.
Explanations:
To Next Page
Loading...
