Rigol DM3058 - Page 153

RIGOL
Programming Guide for DM3058
5-37
Command Format:
MEMory:STATe:DELete:ALL
Function:
The command deletes the data of all memory location.
Explanations:
The factory setting can‘t be deleted, it can be restored after re-power on.
If the data in the selected memory location have been deleted, it will lead to a
error for trying to restore the data.
5. MEMory:STATe:NAME
Command Format:
MEMory:STATe:NAME□{1|2|3|4|5} [,<name>]
MEMory:STATe:NAME?□{1|2|3|4|5}
Function:
The command sets or queries the name of specified memory location.
Parameters:
Name
Type
Range of Values
<name>
ASCII Character
String
It consists of characters, digits and
underlines.
Explanations:
MEMory:STATe:NAME□{1|2|3|4|5}[,<name>]: Set the name of specified
memory location. <name> is optional parameter. If <name> is not set, its default
is ―STATE_location‖ (location is the serial number of memory location; for
example, for the first memory location, the default name is ―STATE_1‖).
MEMory:STATe:NAME? □ {1|2|3|4|5}: Query the name of specified memory
location.
Return Format:
The query returns the name of specified memory location.