Rigol DM3058 - Page 154

RIGOL
Programming Guide for DM3058
5-38
6. MEMory:STATe:RECall:AUTO
Command Format:
MEMory:STATe:RECall:AUTO□{ON|OFF}
MEMory:STATe:RECall:AUTO?
Function:
The command sets or queries the enable state of automatic recall of a specific
stored instrument state when power is on.
Explanations:
MEMory:STATe:RECall:AUTO□{ON|OFF}: Enable or disable the automatic recall
function.
MEMory:STATe:RECall:AUTO?: Query the enable state of the automatic recall
function.
Return Format:
The query returns the enable state of automatic recall function.
7. MEMory:STATe:RECall:SELect
Command Format:
MEMory:STATe:RECall:SELect□{1|2|3|4|5}
MEMory:STATe:RECall:SELect?
Function:
The command sets or queries the state information of instrument at power on if
the automatic recall function is enabled.
Explanations:
Before sending the command, do enable automatic recall function (MEMory:
STATe:RECall:AUTO□ON).
MEMory:STATe:RECall:SELect □ {1|2|3|4|5}: Select the instrument state in
specified memory.
MEMory:STATe:RECall:SELect?: Query the serial number of memory the selected
instrument state is stored in.