Function:
The command sets the ―Operation Complete‖ (zero bit) from Event Status
Register as 1 after finish current operation.
*OPC?: Query whether the current operation is finished or not.
Return Format:
The query returns ―1‖ , which denotes current operation has finished.
10. *RCL
Command Format:
*RCL□{1|2|3|4|5|6|7|8|9|10}
Function:
The command recovers the current status of instrument to the status of selected
location. If the location is empty or can not been detected, an error may be occur.
Totally 10 locations are provided to recover.
11. *SAV
Command Format:
*SAV□{1|2|3|4|5|6|7|8|9|10}
Function:
The command saves current instrument status to the selected location. The
information have been saved in this location before will be covered (no error).
Totally 10 locations are provided for users to save their status information.
To Next Page
Loading...
