Rigol DM3058

RIGOL
Programming Guide for DM3058
5-98
13. SYSTem:COMMunicate:LAN:SMASk
Command Format:
SYSTem:COMMunicate:LAN:SMASk□"<mask>"
SYSTem:COMMunicate:LAN:SMASk?□[{CURRent|STATic}]
Function:
The command sets or queries the mask of instrument.
Parameters:
Name
Type
Range of Values
Default
<mask>
ASCII
character
string
―nnn.nnn.nnn.nnn‖
The range of ―nnn‖ is
0~255
―255.255.255.0‖
Explanations:
SYSTem:COMMunicate:LAN:SMASk□"<mask>": Set the mask of instrument.
SYSTem:COMMunicate:LAN:SMASk?□[{CURRent|STATic}]: Query the mask of
instrument.
If DHCP is ON, the mask address set by manual is invalid.
If DHCP is OFF, the multimeter will use the static IP address, Subnet Mask, and
Default Gateway during power-on.
Return Format:
The query returns current mask.
14. SYSTem:VERSion?
Command Format:
SYSTem:VERSion?
Function:
The commanf queries the SCPI version of instrument.
Return Format:
The query returns the SCPI version of instrument. For example, ―2007.7‖.