Rigol DM3058 - Page 72

RIGOL
Programming Guide for DM3058
3-46
3. :trigger:auto:hold
Command Format:
:trigger:auto:hold?
:trigger:auto:hold□{ON|OFF}
Function:
The command queries and sets the enable state of auto trigger delay.
Explanations:
:trigger:auto:hold?: Query the enable state of auto trigger delay.
:trigger:auto:hold□{ON|OFF}: Enable or disable auto trigger delay.
Return Format:
The query returns the current enable state of auto trigger delay. ―ON‖ means the
delay is on, and ―OFF‖ means off.
4. :trigger:auto:hold:sensitivity
Command Format:
:trigger:auto:hold:sensitivity?
:trigger:auto:hold:sensitivity□{0|1|2|3}
Function:
The command queries and sets the sensitivity of auto trigger delay.
Explanations:
:trigger:auto:hold:sensitivity?: Query the sensitivity of auto trigger delay.
:trigger:auto:hold:sensitivity□{0|1|2|3}: Set the sensitivity of auto trigger delay.
The table 3-8 indicates the parameters and the sensitivities.
Table 3-8 The auto trigger delay sensitivities
Parameter
Sensitivity
0
0.01%
1
0.1%
2
1%
3
10%