Rigol DM3058 - Page 73

RIGOL
Programming Guide for DM3058
3-47
Return Format:
The query returns the parameter related to current sensitivity: 0, 1, 2 or 3.(See
Table 3-8)
5. :trigger:single
Command Format:
:trigger:single?
:trigger:single□{<value>|MIN|MAX|DEF }
Function:
The command queries and sets sampling times of single trigger.
Explanations:
:trigger:single?: Query sampling times of single trigger.
:trigger:single□{<value>|MIN|MAX|DEF }: Set sampling times of single trigger.
Parameters:
Name
Type
Range of Values
Default
<value>
consecutive integer
1~5000
1
Return Format:
The query returns the current sampling times.
6. :trigger:single:triggered
Command Format:
:trigger:single:triggered
Function:
The command carries out the function of single trigger.
Explanation:
The command equals to doing a single trigger by manual operation.