Rigol DM3058

RIGOL
Programming Guide for DM3058
3-62
1. :function2?
Command Format:
:function2?
Function:
This command queries the measuring function of vice display screen.
Explanation:
This command is available only when Double Display is on.
Return Format:
The query returns the identifier related to measuring function of vice display. The
return value may be DCV, ACV, DCI, ACI, 2WR, CAP, 4WR, FREQ or PERI.
2. :function2:value1?
Command Format:
:function2:value1?
Function:
This command queries the measuring value of main display.
Explanation:
This command is available only when Double Display is on.
Return Format:
The query returns the measuring value of main display.
3. :function2:value2?
Command Format:
:function2:value2?
Function:
This command queries the measuring value of vice display.