Explanation:
This command is available only when Double Display is on.
Return Format:
The query returns the measuring value of vice display.
4. :function2:voltage:DC
Command Format:
:function2:voltage:DC
Function:
The command sets the measuring function of vice display as DCV function.
Explanation:
Here, the measuring function of main display should be DCV, DCI, ACV or ACI
only.
5. :function2:voltage:AC
Command Format:
:function2:voltage:AC
Function:
The command sets the measuring function of vice display as ACV function.
Explanation:
Here, the measuring function of main display should be DCV, DCI, ACV, ACI,
FREQUENCY or PERIOD only.
6. :function2:current:DC
Command Format:
:function2:curent:DC
Function:
To Next Page
Loading...
