The command sets the measuring function of vice display as DCI function.
Explanation:
Here, the measuring function of main display should be DCV, DCI, ACV or ACI
only.
7. :function2:current:AC
Command Format:
:function2:current:AC
Function:
The command sets the measuring function of vice display as ACI function.
Explanation:
Here, the measuring function of main display should be DCV, DCI, ACV, ACI,
FREQUENCY or PERIOD only.
8. :function2:frequency
Command Format:
:function2:frequency
Function:
The command sets the measuring function of vice display as Frequency function.
Explanation:
Here, the measuring function of main display should be ACV, FREQUENCY or
PERIOD only.
9. :function2:period
Command Format:
:function2:period
Function:
To Next Page
Loading...
