Rigol DM3058 - Example 1: Reading Statistic Functions

RIGOL
Programming Guide for DM3058
4-4
Command Format:
CONT
Function:
The command enables the Continuity test of main display.
5. DIODE
Command Format:
DIODE
Function:
The command enables the Diode test of main display.
6. FREQ
Command Format:
FREQ
FREQ2
Function:
The command enables the Frequency measuring function of both main and vice
display.
Explanation:
FREQ: Enable the Frequency measuring function of main display.
FREQ2: Enable the Frequency measuring function of vice display.
7. FUNC
Command Format:
FUNC1?
FUNC2?
Function:
The command queries the mnemonic of selected funtion on the main or vice