display.
Explanations:
FUNC1?: Query the measuring funtion of main display.
FUNC2?: Query the measuring funtion of vice display.
If the vice display is disable, error will occur for FUNC2?.
Return Format:
The command returns the mnemonic of current measuring function.
FUNC1?: The query may returns: AAC2, ADC2, CONT, DIODE, FREQ, OHMS,
WIRE2, WIRE4, VAC, VDC.
FUNC2?: The query may returns: AAC, ADC, FREQ, OHMS, VAC, VDC.
8. OHMS
Command Format:
OHMS
OHMS2
Function:
The command enables the Resistance measuring function of main and vice
display.
Explanations:
OHMS: Enable the Resistance measuring function of main display.
OHMS2: Enable the Resistance measuring function of vice display.
9. WIRE
Command Format:
WIRE2
WIRE4
Function:
The command switches 2-wire and 4-wire resistance measuring function each
other when measuring.
To Next Page
Loading...
