Rigol DM3058

RIGOL
Programming Guide for DM3058
4-6
Explanations:
WIRE2: Enable 2-wire resistance measuring function.
WIRE4: Enable 4-wire resistance measuring function.
Both the resistance measuring function of main and vice display are switched
simultaneously when Double Display is on.
10. VAC
Command Format:
VAC
VAC2
Function:
The command enables the AC Voltage measuring function in main and vice
display.
Explanations:
VAC: Enable the AC Voltage measuring function in main display.
VAC2: Enable the AC Voltage measuring function in vice display.
11. VDC
Command Format:
VDC
VDC2
Function:
The command enables the DC Voltage measuring function in main and vice
display.
Explanations:
VDC: Enable the DC Voltage measuring function in main display.
VDC2: Enable the DC Voltage measuring function in vice display.