Chapter 2 Performance Test RIGOL
Service Guide for DM3068
2.1.2 Fast Test
Fast test is an easy way to inspect the functions and specifications of the meter with
higher confidence level. It contains only a few test points, and can evaluate the
accuracy of the meter in normal use rather than to detect an element failure.
Fast Test Directions:
Execute the test items marked with “Q” (indicates the optional quick test
item) in “Routine Test”.
NOTE
The fast test does not apply to the units with an
abnormality in some certain
functions. The meter failed to pass the routine test must be calibrated or repaired
before it is put back into use.
To Next Page
Loading...
