Rigol DM3068

Chapter 4 Disassembly & Assembly RIGOL
Service Guide for DM3068
4-1
Chapter 4 Disassembly & Assembly
4. 1 Disassembly and Assembly Notices
Safety Cautions:
 Do not disassemble the instrument until the necessity arises
 Do not disassemble the instrument unless you are professional
 Cut off the meter power before and during disassembling
 Wear the anti-static hand-ring or take other anti-static measures when
disassembling
 Use proper tools and correctly disassemble the meter in sequence below
 Prevent metallic parts from transfiguration and scratch when disassembling
metal parts
Tools:
 Club screwdriver T10, T15
 Diagonal cutting pliers
WARNING
Make sure the power is cut off before disassembling.
The operator should have been trained or have related qualification.
!