Rigol DM3068

RIGOL Chapter 4 Disassembly & Assembly
Service Guide for DM3068
4-2
4. 2 The 3D View of DM3068
Below is the 3D view of the DM3068 which will help you get a primary understanding
of the main parts of the instrument before disassembling or assembling. You need to
be gentle, follow the steps and be careful not to scratch the surface of the instrument
and the PCB when disassembling or assembling the instrument (for details, refer to
Disassembly and Assembly Notices). The recommended disassembling
procedures are as follows:
Handle  Rear Panel  Metallic Shell  Fuse Seat  GPIB PCB  Filter
Board and Power Frequency Transformer  Front Panel and LCD  Fan 
Mainboard  Keypad PCB
To put above parts in back, reverse the removal procedures.
Figure 4-1 Exterior 3D view of DM3068