RIGOL
Service Guide for DM3068
General Care and Cleaning
General Care:
Do not store or leave the instrument at a place where the instrument will be exposed
to direct sunlight for long periods of time.
Cleaning:
Clean the instrument regularly according to its operating conditions. To clean the
exterior surface, perform the following steps:
1. Disconnect the instrument from all power sources.
2. Moisten a cloth slightly (using a mild detergent or water) and clean the loose
dust on the outside of the instrument. Always take care when you clean the LCD
in order to avoid scuffing it.
To avoid damages to the instrument, do not expose them to corrosive
WARNING
To avoid injury resulting from short circuit, make sure the instrument is
completely dry before reconnecting into a power source.
To Next Page
Loading...
