Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-8
1. :KEY:LOCK
Command Format:
:KEY:LOCK□{ENABle|DISable}
Explanation:
This command is to enable or disable the remote control of the front panel keys.
Query Format:
:KEY:LOCK?
Returned Format:
Query returns “ENABle”. The double quotes are not returned.
Example:
:KEY:LOCK□ENABle Enable the key on the front panel
:KEY:LOCK? Query returns “ENABLE”
2. :KEY:RUN
Command Format:
:KEY:RUN
Explanation:
This command is to control the RUN/STOP mode of the oscilloscope. Toggle
between RUN/STOP every time this command is sent.
3. :KEY:AUTO
Command Format:
:KEY:AUTO
Explanation:
This command is equivalent to the AUTO key, enables the oscilloscope to set the
optimum conditions to display the input signal (waveform).

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English