Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
1-1
Chapter 1 Programming Introduction
This book provides guidance to the remote control programming of the DS1000 and
DS1000CA series digital oscilloscopes.
It includes the necessary conceptual information, the command structure for the
subsystem and the case in the application. Users can carry on the remote control to
the oscilloscope or do the further development according to this manual.
NOTE: The Programming Reference is applicable to the Oscilloscope of
the firmware version above 01.02.18.

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English