Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-7
Keyboard Commands
The Keyboard Commands are the controls of the keys and knobs on the front panel
of the oscilloscope.
Keyboard Commands include:
 :KEY:LOCK
 :KEY:FORCe
 :KEY:RUN
 :KEY:V_POS_INC
 :KEY:AUTO
 :KEY:V_POS_DEC
 :KEY:CHANnel1
 :KEY:V_SCALE_INC
 :KEY:CHANnel2
 :KEY:V_SCALE_DEC
 :KEY:MATH
 :KEY:H_SCALE_INC
 :KEY:REF
 :KEY:H_SCALE_DEC
 :KEY:F1
 :KEY:TRIG_LVL_INC
 :KEY:F2
 :KEY:TRIG_LVL_DEC
 :KEY:F3
 :KEY:H_POS_INC
 :KEY:F4
 :KEY:H_POS_DEC
 :KEY:F5
 :KEY:PROMPT_V
 :KEY:MNUoff
 :KEY:PROMPT_H
 :KEY:MEASure
 :KEY:FUNCtion
 :KEY:CURSor
 :KEY:+FUNCtion
 :KEY:ACQuire
 :KEY:-FUNCtion
 :KEY:DISPlay
 :KEY:LA（only for DS1000*D series）
 :KEY:STORage
 :KEY:PROMPT_V_POS
 :KEY:UTILity
 :KEY:PROMPT_H_POS
 :KEY:MNUTIME
 :KEY:PROMPT_TRIG_LVL
 :KEY:MNUTRIG
 :KEY:OFF
 :KEY:Trig%50
We will give specific explanations for each command in the following part.

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English