Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-53
Trigger Mode Commands
Trigger modes include: Edge, Pulse, Slope, Video, Alternation, Pattern and
Puration. Trigger modes commands include:
 :TRIGger:EDGE:SLOPe
 :TRIGger:PULSe:MODE
 :TRIGger:PULSe:WIDTh
 :TRIGger:SLOPe:TIME
 :TRIGger:SLOPe:MODE
 :TRIGger:SLOPe:WINDow
 :TRIGger:SLOPe:LEVelA
 :TRIGger:SLOPe:LEVelB
 :TRIGger:VIDEO:MODE
 :TRIGger:VIDEO:POLarity
 :TRIGger:VIDEO:STANdard
 :TRIGger:VIDEO:LINE
 :TRIGger:ALTernation:SOURce
 :TRIGger:ALTernation:TYPE
 :TRIGger:ALTernation:TimeSCALe
 :TRIGger:ALTernation:TimeOFFSet
 :TRIGger:ALTernation<mode>:LEVel
 :TRIGger:ALTernation:EDGE:SLOPe
 :TRIGger:ALTernation<mode>:MODE
 :TRIGger:ALTernation<mode>:TIME
 :TRIGger:ALTernation:VIDEO:POLarity
 :TRIGger:ALTernation:VIDEO:STANdard
 :TRIGger:ALTernation:VIDEO:LINE
 :TRIGger:ALTernation:SLOPe:WINDow
 :TRIGger:ALTernation:SLOPe:LEVelA
 :TRIGger:ALTernation:SLOPe:LEVelB
 :TRIGger:ALTernation<mode>:COUPling
 :TRIGger:PATTern:PATTern（Only for DS1000*D series）
 :TRIGger:DURation:PATTern（Only for DS1000*D series）
 :TRIGger:DURation:QUALifier（Only for DS1000*D series）
 :TRIGger:DURation:TIME（Only for DS1000*D series）
We will give specific explanations for each command in the following part.

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English