Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-54
In the trigger System, there is a general command to the edge, pulse width, video,
slope and alternate trigger.
1. :TRIGger<mode_1>[<mode_2>]:SENSitivity
Command Format:
:TRIGger<mode_1>[<mode_2>]:SENSitivity□<count>
Explanation:
The command is to set the trigger sensitivity from 0.1~1div.
<mode_1> can be “:EDGE”, “:PULSE”, “:VIDEO”, “:SLOPE” and “:ALTERNATION”;
When <mode_1> is “:ALTERNATION”, [<mode_2>] can be “:EDGE”, “:PULSE”,
“:VIDEO” or “:SLOPE”, else omit [<mode_2>].
Query Format:
:TRIGger<mode_1>[<mode_2>]:SENSitivity?
Returned Format:
Query returns the set value of <Count> in scientific numeric notation.
Example:
:TRIGger:EDGE:SENSitivity□0.2 Set the edge trigger sensitivity as 0.2div
:TRIGger:EDGE:SENSitivity? Query returns 2.00e-01

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English