Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-81
Math Commands
MATH Commands are used to display the result of adding, subtracting, multiplying
and FFT from Channel 1 and Channel 2, the result can be measured by the grid or
the cursor。
MATH Commands include:
 :MATH:DISPlay
 :FFT:DISPlay
We will give specific explanations for each command in the following part.

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English