Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-82
1. :MATH:DISPlay
Command Format:
:MATH:DISPlay□{ON|OFF}
Explanation:
The command is to turn the MATH function ON or OFF.
Query Format:
:MATH:DISPlay?
Returned Format:
Query returns “ON” or “OFF”. The double quotes are not returned.
Example:
:MATH:DISPlay□ON Set the Math function On
:MATH:DISPlay? Query returns “ON”
2. :FFT:DISPlay
Command Format:
:FFT:DISPlay□{ON|OFF}
Explanation:
The :FFT:DISPlay command is to turn the FFT function Onor Off.
Query Format:
:FFT:DISPlay?
Returned Format:
Query returns “ON” or “OFF”. The double quotes are not returned.
Example :
:FFT:DISPlay□ON Set the FFT function on
:FFT:DISPlay? Query returns “ON”

Rigol DS1000 Series Specifications

General

Trigger Modes	Edge, Pulse, Video, Slope, Alternate
Timebase Range	5 ns/div to 50 s/div
Channels	2
Input Impedance	1 MΩ ±2%, 15 pF ±3 pF
Vertical Resolution	8-bit
Interfaces	USB Host, USB Device
Input Coupling	AC, DC, GND
Power Supply	100-240 VAC
Dimensions	303 mm