Rigol DS1000 Series

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-11
This command is similar to press and select the option of Menu F5. Repeating this
command would enter next level of menu.
13. :KEY:MNUoff
Command Format:
:KEY:MNUoff
Explanation:
This command is to set the menu on or off.
14. :KEY:MEASure
Command Format:
:KEY:MEASure
Explanation:
This command is to set the Measurement function and the menu on or off.
15. :KEY:CURSor
Command Format:
:KEY:CURSor
Explanation:
This command is to set the Cursor function and the menu on or off. Select the
cursor mode by repeating the command.
16. :KEY:ACQuire
Command Format:
:KEY:ACQuire
Explanation:
This command is to set the Acquirement function and the menu on or off.