Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-13
Explanation:
This command is to set the Trigger function and the menu on or off.
22. :KEY:Trig%50
Command Format:
:KEY:Trig%50
Explanation:
This command is to set the trigger level to the mid point of the trigger signal
amplitude.
23. :KEY:FORCe
Command Format:
:KEY:FORCe
Explanation:
This command is to release the locked mode of remote control.
24. :KEY:V_POS_INC
Command Format:
:KEY:V_POS_INC
Explanation:
This command is to move the waveform display up gradually.
25. :KEY:V_POS_DEC
Command Format:
:KEY:V_POS_DEC
Explanation:
This command is to move the waveform display down gradually.

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English