Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-23
Explanation:
This command is to measure the preshoot value of the waveform.
Returned Format:
Query returns 8.00e-03.
12. :MEASure:FREQuency?
Command Format:
:MEASure:FREQuency?□[<source>]
Explanation:
This command is to measure the frequency of the waveform.
Returned Format:
Query returns 1.00e+03, unit is Hz.
13. :MEASure:RISetime?
Command Format:
:MEASure:RISetime?□[<source>]
Explanation:
This command is to measure the risetime of the waveform.
Returned Format:
Query returns <4.00e-05, unit is s.
14. :MEASure:FALLtime?
Command Format:
:MEASure:FALLtime?□[<source>]
Explanation:
This command is to measure the falltime of the waveform.

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English