Rigol DS1000 Series Programming Guide

RIGOL
© 2008 RIGOL Technologies, Inc.
Programming Guide for DS1000/DS1000CA Series
2-71
Example:
:TRIGger:ALTernation:SLOPe:WINDow□PA
Set the border of the vertical window to “PA”.
:TRIGger:ALTernation:SLOPe:WINDow?
Query returns “P_WIN_A”.
6.13 :TRIGger:ALTernation:SLOPe:LEVelA
Command Format:
:TRIGger:ALTernation:SLOPe:LEVelA□<value>
Explanation:
The command is to set the upper trigger level A of Slope trigger.
The range of <value> is -6*Scale ~ +6*Scale. “Scale” indicates the current
vertical scale. The default unit is V/div.
Query Format:
:TRIGger:ALTernation:SLOPe:LEVelA?
Returned Format:
Query returns the set value of <value> in scientific numeric notation.
Example:
:TRIGGER:ALTERNATION:SLOPE:LEVELA□2
Set the trigger level A to 2.
:TRIGGER:ALTERNATION:SLOPE:LEVELA?
Query returns 2.000e+00.
6.14 :TRIGger:ALTernation:SLOPe:LEVelB
Command Format:
:TRIGger:ALTernation:SLOPe:LEVelB□<value>
Explanation:
The command is to set the lower trigger level B of Slope trigger.

Rigol DS1000 Series Specifications

General

Brand	Rigol
Model	DS1000 Series
Category	Test Equipment
Language	English