RIGOL
© 2006 RIGOL Technologies, Inc.
User‟s Guide for DS1000 Series
Factory
The oscilloscope has default settings and can be recalled at anytime by user.
Memory location
Specify the memory location to save/recall the waveforms and setups.
Load
Recall saved waveforms, setups and default settings.
Save
Save waveforms and setups.
NOTE:
1. Select Save stores not only the waveforms, but also the current settings of the
oscilloscope
2. To ensure the setups being saved properly, only after the settings are changed for
more than 5 seconds can the user turn off the instrument. The oscilloscope can store
10 settings permanently and can restore at anytime.
To Next Page
Loading...
Need help?
General
