Rigol DS1000B Series

Command Systems RIGOL
Programming Guide for DS1000B Series
2-27
VIDEO Command
 :TRIGger:VIDEO:MODE
 :TRIGger:VIDEO:POLarity
 :TRIGger:VIDEO:STANdard
 :TRIGger:VIDEO:LINE
PATTern Command
 :TRIGger:PATTern:PATTern
ALTernation Command
 :TRIGger:ALTernation:SOURce
 :TRIGger:ALTernation:CURRentSOURce
 :TRIGger:ALTernation:TYPE
 :TRIGger:ALTernation:TimeSCALe
 :TRIGger:ALTernation:TimeOFFSet
 :TRIGger:ALTernation:LEVel
 :TRIGger:ALTernation:EDGE:SLOPe
 :TRIGger:ALTernation:PULSe:MODE
 :TRIGger:ALTernation:PULSe:TIME
 :TRIGger:ALTernation:VIDEO:POLarity
 :TRIGger:ALTernation:VIDEO:STANdard
 :TRIGger:ALTernation:VIDEO:MODE
 :TRIGger:ALTernation:VIDEO:LINE
 :TRIGger:ALTernation:COUPling
 :TRIGger:ALTernation:HFREject
 :TRIGger:ALTernation:HOLDoff
 :TRIGger:ALTernation:SENSitivity
We will give detailed introductions for each command in the following parts.