Rigol DS1000Z-E Series User Manual

RIGOL Chapter 5 To Trigger the Oscilloscope
5-36 DS1000Z-E User Guide
Trigger Setting:
Press Setting to set the trigger parameter (noise rejection) under this trigger type.
Trigger Level:
When SCL is an analog channel, press SCL and use TRIGGER LEVEL to modify
the trigger level of the SCL channel. When SDA is an analog channel, press SDA and
use TRIGGER LEVEL to modify the trigger level of the SDA channel. For the
details, please refer to the introduction of "Trigger Level".

Rigol DS1000Z-E Series Specifications

General

Brand	Rigol
Model	DS1000Z-E Series
Category	Measuring Instruments
Language	English