Rigol DS1000Z Series

RIGOL Chapter 2 Command System
2-132 DS1000Z Programming Guide
:TRIGger:SPI:DLEVel
Syntax :TRIGger:SPI:DLEVel <level>
:TRIGger:SPI:DLEVel?
Description Set or query the trigger level of the SDA channel in SPI trigger. The unit is the same as the
current amplitude unit.
Parameter
Name
Type
Range
Default
<level> Real (± 5 × VerticalScale from the screen center) - OFFSet 0
Explanation For VerticalScale, refer to :CHANnel<n>:SCALe. For OFFSet, refer
to :CHANnel<n>:OFFSet.
Return
Format
The query returns the trigger level in scientific notation.
Example
:TRIGger:SPI:DLEVel 0.16 /*Set the trigger level to 160mV*/
:TRIGger:SPI:DLEVel? /*The query returns 1.600000e-01*/
Related
Commands
:CHANnel<n>:SCALe
:CHANnel<n>:OFFSet