Rigol DS1000Z Series Programming Guide

Chapter 2 Command System RIGOL
DS1000Z Programming Guide 2-77
:SYSTem Commands
The :SYSTem commands are used to set the system-related parameters, such as the sound and language.
Command List:
 :SYSTem:AUToscale
 :SYSTem:BEEPer
 :SYSTem:ERRor[:NEXT]?
 :SYSTem:GPIB
 :SYSTem:LANGuage
 :SYSTem:LOCKed
 :SYSTem:PON
 :SYSTem:OPTion:INSTall
 :SYSTem:OPTion:UNINSTall
:SYSTem:AUToscale
Syntax :SYSTem:AUToscale <bool>
:SYSTem:AUToscale?
Description
Enable or disable the AUTO key at the front panel, or query the status of the AUTO key.
Parameter
Name
Type
Range
Default
<bool>
Bool
{{0|OFF}|{1|ON}}
1|ON
Explanation
 Users can disable the AUTO key by sending this command or pressing Utility 
Auto Options  Lock and enable it by sending this command.
 After the AUTO key is disabled, the Auto Scale operation is invalid. The :AUToscale
command will be invalid.
Return
Format
The query returns 0 or 1.
Example
:SYSTem:AUToscale ON
:SYSTem:BEEPer
Syntax :SYSTem:BEEPer <bool>
:SYSTem:BEEPer?
Description
Enable or disable the beeper, or query the status of the beeper.
Parameter
Name
Type
Range
Default
<bool>
Bool
{{0|OFF}|{1|ON}}
0|OFF
Return
Format
The query returns 0 or 1.
Example
:SYSTem:BEEPer ON

Rigol DS1000Z Series Specifications

General

Brand	Rigol
Model	DS1000Z Series
Category	Test Equipment
Language	English