Rigol DS1102E Service Guide

RIGOL
Service Guide for DS1000E, DS1000D Series
V
Document Overview
Chapter 1 Specifications
List the specifications and general specifications of DS1000E, DS1000D series.
Chapter 2 Prepare for Use
Introduce the preparatory work should be done before using the oscilloscope.
Chapter 3 Performance Test
Introduce how to execute the performance test to understand current performance
status of the oscilloscope.
Chapter 4 Calibration
Introduce how to calibrate the oscilloscope.
Chapter 5 Disassembly and Assembly
Introduce how to disassemble and assemble the oscilloscope to understand its
structure.
Chapter 6 Troubleshooting
List the troubles may appear during measuring and the corresponding solutions.
Chapter 7 Replaceable Parts
List the replaceable parts for user’s repair or exchange.
Chapter 8 Service & Support
Provide the service and support information.

Rigol DS1102E Specifications

General

Bandwidth	100 MHz
Sample Rate	1 GSa/s
Channels	2
Memory Depth	1 Mpts
Vertical Sensitivity	2 mV/div to 10 V/div
Trigger Modes	Edge, Pulse, Video, Slope, Alternate
Vertical Resolution	8 bits
Input Coupling	DC, AC, GND
Power Supply	100-240 V AC, 45-440 Hz
Display	5.7 inch TFT LCD
Display Resolution	320 x 234
Interfaces	USB Host, USB Device
Input Impedance	1 MΩ ±2%, 15 pF ±3 pF
Dimensions	303 mm x 154 mm x 133 mm