Rigol DS1104Z-S Plus Programming Guide

Chapter 2 Command System RIGOL
MSO1000Z/DS1000Z Programming Guide 2-141
 Users can omit one or multiple parameters. When all of the parameters are omitted,
the commands only select the waveform shape but do not modify the parameters.
 The four parameters (<freq>, <amp>, <offset>, and <phase>) are in order. You
can not omit one parameter and set the one/ones behind it. For example, you can not
omit <freq> and set <amp> directly.

Rigol DS1104Z-S Plus Specifications

General

Brand	Rigol
Model	DS1104Z-S Plus
Category	Test Equipment
Language	English