RIGOL Chapter 2 Front Panel Operations
2-40 DSG800 User Guide
f o l d e r.
Reenter: when the current directory already contains a file or folder with
the same name, you can press this key to return to the filename editing
interface and enter a new filename.
Recall
Select a file stored and press Recall to read the file and load it into the system.
Rename
Modify the filename of the file stored.
Select a file stored and press Rename to enter the filename editing interface; edit a
new filename by referring to the introduction in "
Input the filename" and press
OK to store the file with the new filename.
Delete
Select a file stored and press Delete OK to delete the file selected.
Copy
Select a file stored and press Copy to select "Copy" or "Paste".
1. Copy
Copy the file or folder selected under the current directory.
2. Paste
Paste the file or folder.
When the copy path is the same as the paste path and the current path
already contains a file or folder with the same name, the corresponding
copy file with the "dup1" prefix is generated after you perform the paste
operation.
When the copy path is different from the paste path and the current path
already contains a file or folder with the same name,
— Replace File: press this key to replace the original file or folder.
— Cancel: press this key to cancel the paste operation.
www.calcert.com sales@calcert.com1.888.610.7664
0
5
10
15
20
25
30
To Next Page
Loading...
