© EUROHEAT DISTRIBUTORS (H.B.S) LTD. June 2011
Instructions Part Number IN1227 Ed 1
33
F R O S T
O F F
G S M
S E T
E X T
O F F
S E T U P
The frost protection is activated or deactivated by
using the + or – key. The frost protection function
is only active in connection with a room thermostat.
C - F A N
O F F
R E S E T
- 1 0 -
L O C K
O F F
R O O M
S E T
The external request is activated or deactivated by
using the + or – key. The external request function
is only active in connection with a room thermostat.
G S M
S E T
O K
2 2 ° C
The deviation in the
actual temperature of the
room sensor is changed
using the + or – key.
(adjustment range is
+/- 4 °C).
The C-Fan function is switched on or off
by using the + or – key.
The lock function is switched on or off
by using the + or – key.
All the parameters set are reset to factory
values by using the I/O key.
I N
R O O M
2 2 ° C
F L A M E
3 1 9 °C
I N F O
Current flame temperature
D O O R
O N
G R I D
O N
S T B
O N
E X T
O N
Current room temperature
Current operating status
of external request
Combustion chamber door
open/closed or door
contact switch on/off
Safety temperature limiter
contact open/closed
Grid contact
open/closed
A U G E R
O F F
F A N
O N
A U G E R
0 0
O U T
C - F A N
O F F
I G N I T
O F F
C - F A N
0 0
F A N
0 0
R U N - T
6 3
S E R K G
2 4 5
R U N K G
2 4 5
P A R
T P O
0 1 2 4
T E L 5
1 2
U -V E R
1 3
Screw motor
on/off
Screw motor
information
feed amount
Induced draught
fan motor
on/off
Induced draught
fan motor
information speed
Convection fan
motor on/off
Convection fan
motor information
speed
Ignition element
on/off
Display of
operating hours
Display of
amount conveyed
(in kg pellets)
Display of
conveyed pellet
amount since the
last cleaning and
maintenance
(in kg pellets)
Display of current
software version of
the auxiliary board
Display of current
software version
control panel
Code software
Code hardware
To Next Page
Loading...
