How to fix a noticeable reduction in water flow in my Rinnai REU-VRM3237WC Water Heater?
If you notice a reduction in water flow in your Rinnai Water Heater, the inlet water filter may need to be cleaned. It is recommended to schedule a service call.
How to fix noticeable reduction in water flow in Rinnai REU-VRM3237WC Water Heater?
If you notice a reduction in water flow with your Rinnai Water Heater, the inlet water filter may need cleaning. A service call is recommended.
What to do if Rinnai Water Heater starts then the water goes cold?
If your Rinnai Water Heater starts but the water goes cold, verify that the power is still on and try opening your hot water tap further.
Why is there flame failure or low gas flow in my Rinnai REU-VRM3237WC?
Flame failure or low gas flow in your Rinnai Water Heater may occur if the gas is not turned on at the water heater, gas meter, or cylinder. Another possible cause is obstructions to the flue outlet, so check for those as well.
General| Model Number | REU-VRM3237WC |
|---|---|
| Fuel Type | Natural Gas |
| Maximum Flow Rate | 9.8 GPM |
| Maximum BTU | 199, 000 BTU/hr |
| Minimum BTU | 15, 000 BTU/hr |
| Category | Water Heater |
| Ignition Type | Electronic |
To Next Page
