AGM - Installation and Programming Instructions 13
Event Event description SMS Default
Message
Main Loss Report to Follow Me will be established following
interruption in the source of the main AC power. This
activation will follow the delay time predefined in the AC
Loss Delay timer
"Main power loss"
Main restore Report to Follow Me will be established following to the
restore of normal AC power supply
"Main power OK"
GSM Low
battery
Report to Follow Me will be established following low
battery condition (below 11V)
"GSM Low battery"
GSM Low
battery restore
Report to Follow Me will be established following to the
restore to normal of a weak standby battery
"GSM battery OK"
SIM Expire SMS report to Follow Me will be established 30 days
before the SIM Expiration Time defined for a prepaid
SIM card.
"SIM expire: 1 month"
Periodic FM test "Test Message" SMS report to Follow Me will be
established following the time defined in the Follow Me
Periodic Test parameter
"Periodic Test"
Provider
message
An automatic SMS credit message received from the
provider will be transferred to the Follow Me number.
-
10. SMS User Remote Control Functions
The AGM enables the user to remotely control the AGM using SMS commands. For
security reasons, a user code (4 digits. Default user code 1234) has to be used to
perform the SMS user commands.
For higher security, the SMS remote control operations can be restricted to be
performed only from predefined Follow Me telephone numbers, by using the GSM
network Caller ID feature.
The following remote control operations can be preformed by SMS. More details are
described in the AGM User Instructions.
Activation / Deactivations of AGM outputs defined as User activated,
Arming / Disarming of Inputs defined as Arm / Disarm
Changing / Defining Follow Me destinations (Telephone numbers or Email
addresses)
Receiving Prepaid SIM card credit information
Getting AGM status test messages regarding PSTN line, AC power, Battery
level and GSM network signal level
Getting AGM Inputs status
Getting AGM Outputs status
Setting the AGM clock
To Next Page
Loading...
