4 AGM - Installation and Programming Instructions
1. Introduction
RISCO Group’s AGM, Universal Advanced GSM/GPRS Stand alone Module, is a cellular
communication module enabling any existing security panel to communicate through the
GSM cellular network.
The AGM can be used as the main communication line or as a backup to PSTN line
using telephone line simulation.
1.1 Main Features
Full PSTN line simulation
Primary or backup GSM/GPRS operation modes
4 alarm inputs
4 outputs that can be activated by system events, SMS or CLIP control
Report to two Monitoring Stations by SMS, GPRS or voice (using line
simulation)
Selective event reporting to 8 Follow Me destinations using SMS, E-mail or
voice messages (using the Plug On voice module)
3 LED Status indication
Advanced remote SMS system control
Local / Remote configuration using the AGM Configuration Software through
the GSM data channel (9600 bps) or by SMS commands
GSM signal supervision and level measurement
Wall and cover tamper protection
Prepaid SIM card support
Backup battery charger and battery protection feature
Quad Band GSM 850/900/1800/1900MHz
Output and Input status verification by SMS commands
To Next Page
Loading...
Need help?
General
