EasyManua.ls Logo

Risco AGM - Page 17

Risco AGM
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AGM - Installation and Programming Instructions 17
Command Description Programming Options Default
PINC: PIN Code
4 digit PIN (Personal Identity Number) code required to
access the GSM provider
4 - 8 digits -
Standard Parameters :Dial Parameters
SYRT: System Retries
The number of times the AGM redials a phone number
after failing to establish communication
0 - 9 times 3
SYRW: System Retries Wait
The number of seconds between attempts to redial the
same phone number.
30,60 seconds 30
Standard Parameters :Periodic Test
PRDT: Periodic Test Time
The time that the AGM will automatically call a Follow Me
number in order to check communication with the AGM or
send a test report signal to the Monitoring Station.
24 hour format
HH:MM
(Example: 16:00=1600)
1200
PRTP: Periodic Test Recurrence
The recurrence of performing the periodic test.
0: Never
1: Every day
2: Every 2 days
3: Every 3 days
4: Every 4 days
5: Every 5 days
6: Every 6 days
7: Every 7 days
28: Every month
0
Advanced Parameters :Telephone Prefixes (see Appendix, page 23)
PBX1.. PBX2: Public Exchange Prefix
A number dialed to access an outgoing line when the AGM
is connected to a Private Branch Exchange (PBX) and not
directly to a PSTN line.
Max. 6 digits -
PCS1.. PCS6: Constant Prefix
Initial digits of a phone number that will not to be corrected
when calling through the GSM network.
Max. 6 digits -
PADD: Prefix to Add
Initial digits of telephone numbers that will be added to the
beginning of a telephone number before calling through the
GSM network.
Max. 6 digits -
PRMV: Prefix to Remove
Initial digits of telephone numbers that will be deleted
before calling when using the GSM network.
Max. 6 digits -
Advanced Parameters :Prepay SIM Card
PPSP: Phone To Send Credit
The provider’s phone number to which the credit level SMS
message will be sent to, when performing manual credit
level check.
NOTE:
When using a service command, use both the SMS send
phone and SMS receiving phone fields to enter the
command number (Example: *100#).
Max. 32 digits -

Related product manuals