Need help?Do you have a question about the Risco LightSYS2 and is the answer not in the manual?
General| Partitions | Up to 8 partitions |
|---|---|
| Communication | IP, GSM, PSTN |
| Wireless Frequency | 868 MHz |
| Battery Backup | Yes |
| Humidity | Up to 93% non-condensing |
| Type | Wired/Wireless Security System |
| Mobile App | Yes |
| Event Log | Yes |
| Programming | Via keypad or software |
| Encryption | AES |
| Compatibility | Risco wireless sensors |
| Operating Temperature | -10°C to 55°C |
Explains the various interfaces and tools for operating the LightSYS2 system.
Guides on how to arm the LightSYS2 system, including full and partial settings.
Explains how to set/unset individual partitions and groups within the system.
Details how to disarm the system, including after an alarm, and system reset.
Covers user code setup, authority levels, labels, and changing user codes.
Lists possible system faults, their descriptions, and recommended responses.
To Next Page
