Risco LightSYS2 - Page 46

User Functions and Settings
Page 46
Menu Structure GM U In.
Label: Identifying labels for the Follow Me destination. Enter the
labels according to the instruction defined for user label on
page 33
Terminate Follow Me
√ - -
If Follow Me destination(s) were chosen, their operation can be
terminated. Use this function when an alarm has been tripped and
there is no need to utilize the Follow Me feature.
Test Follow Me
√ - √
Used to test Follow Me reporting.
View
Fault
√ √ √
Should be used when the system has detected a problem, which is
evidenced by the rapid flashing of the power icon, as described
on page 10.
Alarm Memory
√ √ √
Displays the five most recent alarm conditions stored by the
system.
Partition Status
√ √ √
Displays the partitions' status, the faults in the system and all “not
ready” zones.
Pressing on the key from the normal operation mode
displays the status of the partition to which the keypad is
assigned. Pressing the sequence [CODE] from the normal
operation mode displays the status of all the partitions assigned to
the user code.
Zone Status
√ √ √
Allows the display of all system zones and their current status.
Service Info
√ √ √
Allows the display of any previously entered service information
and the system version
[Sytem Entry Level] Status of current user
System Version The installed firmware version of LightSYS2.
Serial Number The 11-digit number used by the cloud to identify
the panel