User Functions and Settings
Page 47
Menu Structure GM U In.
Panel ID The 15-digit number used by the end-user for self-
registration to the RISCO cloud (See page 3)
IP Address
√ - √
Use this option to view the IP address of the LightSYS2. This
option is available only if IP module is defined in the system
Codes/Tags
Define
√ √ -
Codes:
Edit Code— Use this menu to edit user codes in the system.
For detailed information refer to page 34.
Erase Code — Use this menu to delete user codes in the
system
Proximity Tag:
(Re)write Tag— Assigns user codes to proximity tags. For
detailed information refer to page 33
Delete Tag— Deletes a proximity tag of the selected user.
Edit Label — Assigns labels to users (16 characters long). These
labels are presented in the event log.
Delete By Tag
√ - -
Use this option to delete a proximity tag when the user of the tag
is unknown.
Clock
Time & Date
√ - √
Allows the setting of the system time and dates, as described on
page 35. This definition is required for setting the scheduler
programming in the system.
Scheduler
√ - √
Weekly — Enables you to define up to four weekly programs with
up to two time intervals per day, during which the system
automatically sets/unsets, activates utility output , or prevents
users from unsetting.
One Time — Enables a one-time operation of automatic Set/Unset
of the system at a specific time within the next 24 hours.
Schedule Enable — Enables you to activate or deactivate
predefined schedules.
To Next Page
Loading...
