24
TEMPERATURE ALARMS
ALARM 20 – AMBIENT TEMPERATURE OUT OF RANGE (with machine in stand-by)
Possible cause: Ambient temperature is out of machine’s limits ( -10°C ÷ +40°C )
Solution: Protect working place in order to keep temperature within limits.
ALARM 40 – MACHINE’S OVERHEATING (with machine in stand-by)
Possible cause: After one fusion machine has reached a very hi temperature
Solution: Wait for the machine to cool down
ALARM 2000 – MACHINE’S OVERHEATING (during fusion)
Possible cause: Electronic circuit’s temperature is too hi
Solution: Wait for the circuit to cool down and repeat fusion process.
ALARM 4000 – TRANSFORMER IS OVERHEATED (during fusion)
Possible cause: Transformer’s temperature is too hi
Solution: Wait for the transformer to cool down and repeat fusion process.
INTERNAL ALARMS
ALARM 1 – CALIBRATION (when turning machine on)
Possible cause: Internal error
Solution: Contact an authorized service centre
ALARM 2 – MEMORY
Possible cause: Internal error
Solution: Contact an authorized service centre
To Next Page
Loading...
