Rittal 3237.700 - Table of Contents

Rittal Blue e+ fan-and-filter unit assembly and operating instructions 3
Contents
EN
Contents
1 Notes on documentation ......................4
1.1 Other applicable documents ............................. 4
1.2 Storing the documents ..................................... 4
1.3 Symbols used in these operating instructions ... 4
2 Safety instructions ................................4
3 Product description ..............................4
3.1 Functional description ....................................... 5
3.1.1 Main components ............................................ 5
3.1.2 Control ............................................................. 5
3.1.3 Safety equipment ............................................. 5
3.1.4 Filter mats ........................................................ 5
3.2 Intended use .................................................... 5
3.3 Scope of supply ............................................... 5
4 Assembly and connections ..................5
4.1 Choosing the installation site ............................ 5
4.2 Assembly instructions ....................................... 5
4.2.1 General ............................................................ 5
4.2.2 Layout of the components in the enclosure ...... 6
4.3 Fitting the fan-and-filter unit or outlet filter ......... 6
4.3.1 Cutting out the enclosure ................................. 6
4.3.2 Fitting the fan-and-filter unit .............................. 6
4.3.3 Safety clip ........................................................ 7
4.4 Notes on electrical connection .......................... 7
4.4.1 Connection data ............................................... 7
4.4.2 Overvoltage protection and supply line load ...... 7
4.4.3 PE conductor connection ................................. 7
5 Carrying out the electrical connection ...7
5.1 Connecting the power supply ........................... 7
5.2 Rotating the voltage connection ....................... 8
5.3 Changing the direction of airflow....................... 9
6 Commissioning ..................................10
7 Installing and changing the filter..........10
7.1 Replacing the pleated filter ............................. 10
7.2 Replacing the chopped-fibre filter ................... 11
8 Inspection and maintenance ..............12
9 Storage and disposal .........................12
10 Technical specifications ...................... 13
11 Cut-out/drilling dimensions .................20
12 EMC fan/outlet filter ............................21
13 Accessories .......................................22
14 Connection diagrams .........................24
15 Declaration of conformity ....................25