RKC INSTRUMENT CD101 - Page 14

3. SETTING FOR COMMUNICATION
IMCD06-E2
8
2. Set the device address. Press the UP key to enter "5" in the lowest digit.
PV
SV
AT OUT1 OUT2 ALM1 ALM2
R/S
CD901
C
SET
3. Press the <R/S key to brightly light the tens digit.
PV
SV
AT OUT1 OUT2 ALM1 ALM2
R/S
CD901
C
SET
4. Press the UP key to enter "1" in the tens digit.
PV
SV
AT OUT1 OUT2 ALM1 ALM2
R/S
CD901
C
SET
5. Press the SET key to select the next communication parameter. As a result, the set device
address is registered.