RKC INSTRUMENT REX - C410 User Manual

This is a manual for the initial setting of the REX-C100, -C400, -C410, -C700, & -C900. Do not
touch or adjust parts other than those covered in this manual. The instrument was manufactured
and delivered under close quality control by us. However, is some subject troubled or noted, your
kindly announce and advice to our business department, nearest business office also agent where
you bought is very much appreciated.
C O N T E N T S
Page
1. Initial set mode changing
1.1 Entering the initial set mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Exiting the initial set mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Setting
2.1 Description of each parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2 Each parameter setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
(1) Input type selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
(2) Engineering unit and cooling type selection . . . . . . . . . . . . . . . . . . . . . . . 6
(3) Selection of break alarm (HBA, LBA) etc. . . . . . . . . . . . . . . . . . . . . . . . . 7
(4) First alarm (ALM1) type selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
(5) Second alarm (ALM2) type selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
(6) Control output selection etc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
(7) Energize/de-energize alarm selection etc. . . . . . . . . . . . . . . . . . . . . . . . . . 12
(8) PV bias setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
(9) Differential gap setting of ON/OFF action . . . . . . . . . . . . . . . . . . . . . . . . 13
(10) Differential gap setting of first alarm (ALM1) . . . . . . . . . . . . . . . . . . . . . 13
(11) Differential gap setting of second alarm (ALM2) . . . . . . . . . . . . . . . . . . . 13
(12) High-limit setting for set-value (SV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
(13) Low-limit setting for set-value (SV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.3 Each parameter checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

RKC INSTRUMENT REX - C410 Specifications

General

Brand	RKC INSTRUMENT
Model	REX - C410
Category	Controller
Language	English