Rhein-Nadel Automation GmbH 4
VT-BA-SCU1000-2000-EN_2019 / 27.06.2019 SJ
1. About this document
The information given in this document reflects the following version:
1.1. Document description:
This document provides assistance in choosing your product. You will also find information on mechanical and electri-
cal installation, product extensions and accessories.
2. Safety directives
2.1. Design of safety directives
2.2. Fundamental safety directives
Non-observance of the following fundamental safety measures and directives may lead to severe injury and damage
to property!
Meeting the requirements given in the related documentation is a precondition for safe and trouble-free operation and
for achieving the product properties specified. Further additional safety directives in the other sections must be ob-
served as well.
2.3. Personnel
Only qualified professionals are allowed to work on or with the product. IEC 60364 or
CENELEC HD 384 define the qualification of these persons:
• They are familiar with set-up, installation, commissioning and operation of the product.
• They possess the qualification required for performance of their work.
• They know all regulations for the prevention of accidents, directives and laws applicable to set-up, installa-
tion and commissioning on site, and they are able to apply the same.
• They have knowledge and skills of First Aid.
Attention!
Any work on electrical equipment of the machine/system shall be carried out exclusively by a professional
electrician, or by instructed persons working under the direction and supervision of a professional electri-
cian, according to electrotechnical rules.
To Next Page
Loading...
Need help?
General
